Uma minirevisão sobre a incorporação de nanotubos de carbono em materiais a base de cimento / A minireview of carbon nanotubes incorporation in cement-based materials

Authors

  • Andressa Panizzon
  • Daniel Vicente Filipak Vanin

DOI:

https://doi.org/10.34117/bjdv6n10-018

Keywords:

Nanotubos de carbono, resistência mecânica, resistência à tração, resistência à flexão, porosidade.

Abstract

Considerado uma das maiores descobertas da nanotecnologia, devido a sua elevada resistência mecânica, os nanotubos de carbono (CNTs) vem sendo utilizados na produção de compósitos cimentícios. Assim, este artigo apresenta uma visão geral de algumas das pesquisas publicadas sobre o uso dos CNTs como adição em misturas a base de cimento e seus efeitos nas propriedades mecânicas como resistência à compressão e tração na flexão, bem como na microestrutura e porosidade do produto final.

References

ABU AL-RUB, Rashid K.; ASHOUR, Ahmad I.; TYSON, Bryan M. On the aspect ratio effect of multi-walled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites. Construction and Building Materials, [S. l.], v. 35, p. 647–655, 2012. DOI: 10.1016/j.conbuildmat.2012.04.086.

BATISTON, Eduardo Roberto. Incorporação de nanotubos de carbono em matriz de cimento portland. 2012. Universidade Federal de Santa Catarina, [S. l.], 2012.

DRESSELHAUS, M. S.; DRESSELHAUS, G.; JORIO, A. Unusual Properties and Structure of Carbon Nanotubes. Annual Review of Materials Research, [S. l.], v. 34, n. 1, p. 247–278, 2004. DOI: 10.1146/annurev.matsci.34.040203.114607.

FOLDYNA, Josef; FOLDYNA, Vladimír; ZELE?ÁK, Michal. Dispersion of carbon nanotubes for application in cement composites. Procedia Engineering, [S. l.], v. 149, n. June, p. 94–99, 2016. DOI: 10.1016/j.proeng.2016.06.643.

LI, Chia Chen; LIN, Jen Lien; HUANG, Shu Jiuan; LEE, Jyh Tsung; CHEN, Ci Huei. A new and acid-exclusive method for dispersing carbon multi-walled nanotubes in aqueous suspensions. Colloids and Surfaces A: Physicochemical and Engineering Aspects, [S. l.], v. 297, n. 1–3, p. 275–281, 2007. DOI: 10.1016/j.colsurfa.2006.10.022.

LI, Geng Ying; WANG, Pei Ming; ZHAO, Xiaohua. Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes. Carbon, [S. l.], v. 43, n. 6, p. 1239–1245, 2005. DOI: 10.1016/j.carbon.2004.12.017.

LI, Geng Ying; WANG, Pei Ming; ZHAO, Xiaohua. Pressure-sensitive properties and microstructure of carbon nanotube reinforced cement composites. Cement and Concrete Composites, [S. l.], v. 29, n. 5, p. 377–382, 2007. DOI: 10.1016/j.cemconcomp.2006.12.011.

LIU, Yangqiao; GAO, Lian; ZHENG, Shan; WANG, Yan; SUN, Jing; KAJIURA, Hisashi; LI, Yongming; NODA, Kazuhiro. Debundling of single-walled carbon nanotubes by using natural polyelectrolytes. Nanotechnology, [S. l.], v. 18, n. 36, 2007. DOI: 10.1088/0957-4484/18/36/365702.

MACLEOD, Alastair J. N.; FEHERVARI, Andras; GATES, Will P.; GARCEZ, Estela O.; ALDRIDGE, Laurie P.; COLLINS, Frank. Enhancing fresh properties and strength of concrete with a pre-dispersed carbon nanotube liquid admixture. Construction and Building Materials, [S. l.], v. 247, p. 118524, 2020. DOI: 10.1016/j.conbuildmat.2020.118524.

MANZUR, Tanvir; YAZDANI, Nur; EMON, Md. Abul Bashar. Effect of Carbon Nanotube Size on Compressive Strengths of Nanotube Reinforced Cementitious Composites. Journal of Materials, [S. l.], v. 2014, p. 1–8, 2014. DOI: 10.1155/2014/960984.

MUSSO, Simone; TULLIANI, Jean Marc; FERRO, Giuseppe; TAGLIAFERRO, Alberto. Influence of carbon nanotubes structure on the mechanical behavior of cement composites. Composites Science and Technology, [S. l.], v. 69, n. 11–12, p. 1985–1990, 2009. DOI: 10.1016/j.compscitech.2009.05.002.

NOCHAIYA, T.; TOLKIDTIKUL, P.; SINGJAI, P.; CHAIPANICH, A. Microstructure and characterizations of portland-carbon nanotubes pastes. Advanced Materials Research, [S. l.], v. 55–57, p. 549–552, 2008. DOI: 10.4028/www.scientific.net/amr.55-57.549.

PARVEEN, Shama; RANA, Sohel; FANGUEIRO, Raul; PAIVA, Maria Conceição. Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using a novel dispersion technique. Cement and Concrete Research, [S. l.], v. 73, p. 215–227, 2015. DOI: 10.1016/j.cemconres.2015.03.006.

PEDDAVARAPU, Sreehari; JAYENDRA BHARATHI, R. Dry Sliding Wear Behaviour of AA6082-5%SiC and AA6082-5%TiB2 Metal Matrix Composites. In: MATERIALS TODAY: PROCEEDINGS 2018, Anais [...]. : Elsevier Ltd, 2018 p. 14507–14511. DOI: 10.1016/j.matpr.2018.03.038.

SIDDIQUE, Rafat; MEHTA, Ankur. Effect of carbon nanotubes on properties of cement mortars. Construction and Building Materials, [S. l.], v. 50, p. 116–129, 2014. DOI: 10.1016/j.conbuildmat.2013.09.019.

XU, Shilang; LIU, Jintao; LI, Qinghua. Mechanical properties and microstructure of multi-walled carbon nanotube-reinforced cement paste. Construction and Building Materials, [S. l.], v. 76, p. 16–23, 2015. DOI: 10.1016/j.conbuildmat.2014.11.049.

ZHAO, Wen Sheng; FU, Kai; WANG, Da Wei; LI, Meng; WANG, Gaofeng; YIN, Wen Yan. Mini-review: Modeling and performance analysis of nanocarbon interconnects. Applied Sciences (Switzerland)MDPI AG, 2019. DOI: 10.3390/app9112174. Disponível em: . Acesso em: 21 set. 2020.

Published

2020-10-02

How to Cite

Panizzon, A., & Vanin, D. V. F. (2020). Uma minirevisão sobre a incorporação de nanotubos de carbono em materiais a base de cimento / A minireview of carbon nanotubes incorporation in cement-based materials. Brazilian Journal of Development, 6(10), 74316–74325. https://doi.org/10.34117/bjdv6n10-018

Issue

Section

Original Papers