Influence of Resin Cements and Ceramic types on the Color Stability and Translucence of Laminate Veneers/ Influência dos Cimentos de Resina e Tipos Cerâmicos na Estabilidade da Cor e Translucidez das Facetas Laminadas

Francisca Daniele Jardilino Silami, Cristian Sbardelotto, Rafaella Tonani- Torrieri, Rossana Pereira de Almeida, Carolina Noronha Ferraz de Arruda, Fernanda de Carvalho Panzeri Pires- de-Souza

Abstract


Objective: This study evaluated the color stability and translucence of resin cements in the fixation of ceramic veneers submitted to aging protocols. Material and Methods: Buccal faces of bovine incisors were planed up to dentin. Eighty ceramic veneers (1 mm) were prepared using two pressed ceramics (IPS e-maxPress and IPS e-maxZirpress, IvoclarVivadent). Before the initial color and translucence readouts (Vita EasyShade, VITA), the veneers were fixed with light (Variolink II, Ivoclar/Vivadent) or dual cured (Relyx U200, 3M ESPE) cements. The samples were submitted (n=10) to thermal mechanical cycling (1.200.000 cycles, 1,3Hz, 5°C/37°C/55°C); and no aging protocol (control). New color and translucence readouts were performed. The cement thickness was quantified by a double coordinate stereomicroscope (Nikon Measurescope) as a control of the study. Results: Data (3-way ANOVA, Tukey, p<0,05) showed difference (p>0.05) in the color change for both ceramics cemented with U200 with no aging protocol. In the other groups, there was no significant difference (p>0.05). There was no difference for translucence regardless ceramics, cements, or aging protocol. Thermal mechanical cycling was not significant for optical changes of the ceramics tested. Conclusions: It was concluded that the color stability and translucence of ceramics with thickness of 1mm were not influenced by the cement when submitted to thermal mechanical cycling.

 


Keywords


color stability, resin cements, dental veneers, translucence; cementation line.

Full Text:

PDF

References


Radz GM. Minimum thickness anterior porcelain restorations. Dent Clin N Am 2011; 55(2):353-370. doi: 10.1016/j.cden.2011.01.006.

Lim H-N, Yu B, Lee Y-K. Spectroradiometric and spectrophotometric translucency of ceramic materials. J Prosthet Dent 2010;104:239–246. doi: 10.1016/S0022-3913(10)60131-X.

Turgut S, Bagis B. Effect of resin cement and ceramic thickness on final color of laminate veneers: an in vitro study. J Prosthet Dent 2013;109:179–186. doi: 10.1016/S0022-3913(13)60039-6.

Stevenson B, Ibbetson R. The effect of the substructure on the colour of samples/restorations veneered with ceramic: a literature review. J Dent 2010;38:361–368. doi: 10.1016/j.jdent.2010.01.009.

Della Bona A, Anusavice KJ. Microstructure, composition, and etching topography of dental ceramics. Int J Prosthodont 2002; 15(2):159-167. PMID: 11951806.

Dozić A, Kleverlaan CJ, Meegdes M, Van Der Zel J, Feilzer AJ. The influence of porcelain layer thickness on the final shade of ceramic restorations. J Prosthet Dent 2003; 90(6):563-570. doi: 10.1016/s0022-3913(03)00517-1.

Vichi A, Ferrari M, Davidson CL. Influence of ceramic and cement thickness on the masking of various types of opaque posts. J Prosthet Dent 2000; 83(4):412-417. doi: 10.1016/s0022-3913(00)70035-7.

Lee YK, Cha HS, Ahn JS. Layered color of all-ceramic core and veneer ceramics. J Prosthet Dent 2007; 97(5):279-286. doi: 10.1016/j.prosdent.2007.03.010.

Chang J, Da Silva JD, Sakai M, Kristiansen J, Ishikawa-Nagai S. The optical effect of composite luting cement on all ceramic crowns. J Dent 2009;37:937–943. doi: 10.1016/j.jdent.2009.07.009.

Seghi RR, Johnston WM, O’Brien WJ. Spectrophotometric analysis of color differences between porcelain systems. J Prosthet Dent 1986; 56(1):35-40. doi: 10.1016/0022-3913(86)90279-9.

Bahannan SA. Shade matching quality among dental students using visual and instrumental methods. J Dent 2014; 42(1):48-52. doi: 10.1016/j.jdent.2013.11.001.

Bagis B, Turgut S. Optical properties of current ceramics systems for laminate veneers. J Dent 2013; 41 Suppl 3:e24-30. doi: 10.1016/j.jdent.2012.11.013.

Harada K, Raigrodski AJ, Chung KH, Flinn BD, Dogan S, Mancl LA. A comparative evaluation of the translucency of zirconias and lithium disilicate for monolithic restorations. J Prosthet Dent 2016; 116(2):257-263. doi: 10.1016/j.prosdent.2015.11.019.

Gale MS, Darvell BW. Thermal cycling procedures for laboratory testing of dental restorations. J Dent 1999;27:89–99. doi: 10.1016/s0300-5712(98)00037-2.

Blatz MB, Vonderheide M, Conejo J. The Effect of Resin Bonding on Long-Term Success of High-Strength Ceramics. J Dent Res 2018;97:132–139. doi: 10.1177/0022034517729134.

De Munck J, Vargas M, Van Landuyt K, Hikita K, Lambrechts P, Van Meerbeek B. Bonding of an auto-adhesive luting material to enamel and dentin. Dent Mater 2004; 20(10):963-971. doi: 10.1016/j.dental.2004.03.002.

Han L, Okamoto A, Fukushima M, Okiji T. Evaluation of Physical Properties and Surface Degradation of Self-adhesive Resin Cements. Dent Mater J 2007; 26(6):906-914. doi: 10.4012/dmj.26.906.

Cantoro A, Goracci C, Coniglio I, Magni E, Polimeni A, Ferrari M. Influence of ultrasound application on inlays luting with self-adhesive resin cements. Clin Oral Investig 2011; 15(5):617-623. doi: 10.1007/s00784-010-0451-5.

Pavan S, Dos Santos PH, Berger S, Bedran-Russo AKB. The effect of dentin pretreatment on the microtensile bond strength of self-adhesive resin cements. J Prosthet Dent 2010; 104(4):258-264. doi: 10.1016/S0022-3913(10)60134-5.

Nakamura T, Wakabayashi K, Kinuta S, Nishida H, Miyamae M, Yatani H. Mechanical properties of new self-adhesive resin-based cement. J Prosthodont Res 2010; 54(2):59-64. doi: 10.1016/j.jpor.2009.09.004.

Walter R, Miguez PA, Pereira PNR. Microtensile bond strength of luting materials to coronal and root dentin. J Esthet Restor Dent 2005; 17(3):165-171. doi: 10.1111/j.1708-8240.2005.tb00107.x.

Miyagawa Y, Powers JM, O’Brien WJ. Optical properties of direct restorative materials. J Dent Res 1981;60:890–894. doi: 10.1177/00220345810600050601.

Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part II: core and veneer materials. J Prosthet Dent 2002;88:10–15. PMID: 12239473.

Lu H, Powers JM. Color stability of resin cements after accelerated aging. Am J Dent 2004; 17(5):354-358. PMID: 15575448.

Turgut S, Bagis B. Colour stability of laminate veneers: an in vitro study. J Dent 2011;39 Suppl 3:e57-64. doi: 10.1016/j.jdent.2011.11.006.

Xing W, Jiang T, Ma X, Liang S, Wang Z, Sa Y, et al. Evaluation of the esthetic effect of resin cements and try-in pastes on ceromer veneers. J Dent 2010; 38 Suppl 2:e87-94. doi: 10.1016/j.jdent.2010.05.007.

Crisp S, Abel G, Wilson AD. The Quantitative Measurement of the Opacity of Aesthetic Dental Filling Materials. J Dent Res 1979; 58(6):1585-1596. doi: 10.1177/00220345790580060801.

Kelly JR, Nishimura I, Campbell SD. Ceramics in dentistry: Historical roots and current perspectives. J Prosthet Dent 1996; 75(1):18-32. doi: 10.1016/s0022-3913(96)90413-8.

Sorensen JA, Cruz M, Mito WT, Raffeiner O, Meredith HR, Foser HP. A clinical investigation on three-unit fixed partial dentures fabricated with a lithium disilicate glass-ceramic. Pract Periodontics Aesthet Dent 1999; 11(1):95-106; quiz 108. PMID: 10218055.

Wang F, Chai Z, Deng Z, Gao J, Wang H, Chen J. Effect of heat-pressing temperature and holding time on the microstructure and flexural strength of lithium disilicate glass-ceramics. PloS one 2015;10:e0126896. doi: 10.1371/journal.pone.0126896.

Paravina RD, Ghinea R, Herrera LJ, Bona AD, Igiel C, Linninger M, et al. Color difference thresholds in dentistry. J Esthet Restor Dent 2015; 27 Suppl 1:S1-9. doi: 10.1111/jerd.12149.

Ukon S, Ishikawa M, Tohyama M, Sato H. Determination of the fabricating conditions for the preferable marginal and internal adaptation of the mica crystal castable ceramic crown. Dent Mater J 2004; 23(1):53-62. doi: 10.4012/dmj.23.53.

Freire A, Archegas LRP. Porcelain laminate veneer on a highly discoloured tooth: a case report. Journal (Canadian Dental Association) 2010;76:a126. PMID: 20943031.

Silami FDJ, Tonani R, Alandia-Román CC, Pires-De-Souza F de CP. Influence of different types of resin luting agents on color stability of ceramic laminate veneers subjected to accelerated artificial aging. Braz Dent J 2016; 27(1):95-100. doi: 10.1590/0103-6440201600348.

Kilinc E, Antonson SA, Hardigan PC, Kesercioglu A. The effect of ceramic restoration shade and thickness on the polymerization of light- and dual-cure resin cements. Oper Dent 2011;36:661–669. doi: 10.2341/10-206-L.

Alsaleh S, Labban M, Alhariri M, Tashkandi E. Evaluation of self shade matching ability of dental students using visual and instrumental means. J Dent 2012; 40 Suppl 1:e82-87. doi: 10.1016/j.jdent.2012.01.009.

Liu Q, Meng X, Yoshida K, Luo X. Bond degradation behavior of self-adhesive cement and conventional resin cements bonded to silanized ceramic. J Prosthet Dent 2011; 105(3):177-184. doi: 10.1016/S0022-3913(11)60026-7.

Petropoulou A, Vrochari AD, Hellwig E, Stampf S, Polydorou O. Water sorption and water solubility of self-etching and self-adhesive resin cements. J Prosthet Dent 2015; 114(5):674-679. doi: 10.1016/j.prosdent.2015.06.002.

De Oliveira DCRS, Ayres APA, Rocha MG, Giannini M, Puppin Rontani RM, Ferracane JL, et al. Effect of different in vitro aging methods on color stability of a dental resin-based composite using CIELAB and CIEDE2000 color-difference formulas. J Esthet Restor Dent 2015; 27(5):322-330. doi: 10.1111/jerd.12155.

Almeida JR, Schmitt GU, Kaizer MR, Boscato N, Moraes RR. Resin-based luting agents and color stability of bonded ceramic veneers. J Prosthet Dent 2015; 114(2):272-277. doi: 10.1016/j.prosdent.2015.01.008.

Akgungor G, Akkayan B, Gaucher H. Influence of ceramic thickness and polymerization mode of a resin luting agent on early bond strength and durability with a lithium disilicate-based ceramic system. J Prosthet Dent 2005; 94(3):234-241. doi: 10.1016/j.prosdent.2005.04.020.

Antonson SA, Anusavice KJ. Contrast ratio of veneering and core ceramics as a function of thickness. Int J Prosthodont 2001; 14(4):316-320. PMID: 11508085.

Holmes JR, Bayne SC, Holland GA, Sulik WD. Considerations in measurement of marginal fit. J Prosthet Dent 1989; 62(4):405-408. doi: 10.1016/0022-3913(89)90170-4.

Manso AP, Silva NRFA, Bonfante EA, Pegoraro TA, Dias RA, Carvalho RM. Cements and adhesives for all-ceramic restorations. Dent Clin North Am 2011; 55(2):311-332, ix. doi: 10.1016/j.cden.2011.01.011.

Pegoraro TA, da Silva NRFA, Carvalho RM. Cements for Use in Esthetic Dentistry. Dent Clin North Am 2007; 51(2):453-471, x. doi: 10.1016/j.cden.2007.02.003.

Ng J, Ruse D, Wyatt C. A comparison of the marginal fit of crowns fabricated with digital and conventional methods. J Prosthet Dent 2014; 112(3):555-560. doi: 10.1016/j.prosdent.2013.12.002.

Reich S, Gozdowski S, Trentzsch L, Frankenberger R, Lohbauer U. Marginal fit of heat-pressed vs. CAD/CAM processed all-ceramic onlays using a milling unit prototype. Oper Dent 2008;33:644–650. doi: 10.2341/07-162.

Aboushelib MN, Elmahy WA, Ghazy MH. Internal adaptation, marginal accuracy and microleakage of a pressable versus a machinable ceramic laminate veneers. J Dent 2012; 40(8):670-677. doi: 10.1016/j.jdent.2012.04.019.




DOI: https://doi.org/10.34119/bjhrv4n5-231

Refbacks

  • There are currently no refbacks.