Influência do extensor de cadeia nas propriedades reológicas de Blendas de Polímeros Biodegradáveis PLA/PBAT / Influence of the chain extender on the rheological properties of PLA/PBAT Biodegradable Polymer Blends
DOI:
https://doi.org/10.34115/basrv4n6-059Keywords:
PLA, PBAT, blendas poliméricas, tensão interfacial.Abstract
O objetivo do presente trabalho foi estudar a influência do extensor de cadeia, Joncryl ADR 4368, no comportamento reológico de um sistema imiscível formado por uma blenda de polímeros biodegradáveis PLA/PBAT. As composições selecionadas foram de 0%, 80% e 100% de PLA em peso nomeadas como: PBAT, 80PLA e PLA, e para a utilização do extensor de cadeia foram utilizadas formulações com 0,3% e 0,6% em peso, respectivamente. Foram determinadas as propriedades viscoelásticas em regime dinâmico oscilatório (RDO) do PLA e do PBAT bem como de suas blendas, com e sem extensor de cadeia, por reometria em regime cisalhamento dinâmico oscilatório. Por fim, aplicando-se o modelo de Palierne foi possível prever o módulo complexo do sistema PLA/PBAT estimando o tamanho da fase dispersa.
References
Al-Itry , R.; Lamnawar, K. e Maazouz, A. “Rheological, morphological, and interfacial properties of compatibilized PLA/PBAT blends”. Rheologica Acta, 53, p. 501–517, 2014
Ningjing Wu, Hong Zhang “Mechanical properties and phase morphology of
super-tough PLA/PBAT/EMA-GMA multicomponent blends”. Materials Letters (2017).
Utracki, L.A. "Polymer Alloys and Blends: Thermodynamics and Rheology". Muunich: Hanser, 1990.
Paul, D.R.; Bucknall, C.B. "Polymer blends: Formulation, Volume 1". Universidade de Michigan: 2000.
Folkes, M.J.; Hope, P.S. "Polymer Blends and Alloys". Cambridge: 1993.
Turchet, Renato. Blendas Ternárias PPO/AES/PS: Estudo da Miscibilidade, Compatibilidade e Estabilidade Fotooxidativa 2006. 144f. Tese (Doutorado em ciências) - Universidade Estadual de Campinas, Instituto de Química, Campinas. 2006.
Graebling, D.; Muller, R.; Palierne, J.F. "Linear viscoelastic behavior of some incompatible polymer blends in the melt. Interpretation of data with a model of emulsion of viscoelastic liquids". Macromolecules, v. 26, n. 2, pp. 320–329, 1993.
Al-Itry , R.; Lamnawar, K. e Maazouz, A. “Improvement of thermal stability, rheological and mechanical properties of PLA, PBAT and their blends by reactive extrusion with functionalized epoxy”. Polymer Degradation and Stability 97, 2012.
Dinga, Y.; Lu, B.; Wanga, P.; Wanga, G. e Junhui, J. “PLA-PBAT-PLA tri-block copolymers: Effective compatibilizers for promotion of the mechanical and rheological properties of PLA/PBAT blends”. Polymer Degradation and Stability 147, 2018.
Arruda, L. C.; Magaton, M.; Bretas, R. E. S. e Ueki, M. M. “Influence of chain extender on mechanical, thermal and morphological properties of blown films of PLA/PBAT blends” Polymer Testing 43, 2015.
Zhang, N.; Zeng, C.; Wang, L.; et al. "Preparation and Properties of Biodegradable Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Blend with Epoxy-Functional Styrene Acrylic Copolymer as Reactive Agent". Journal of Polymers and the Environment, v. 21, pp. 286–292, 2013.
Nofar , M; Maani , A.; Sojoudi, H.; Heuzey, M. C. e Carreau , P. J. “Interfacial and rheological properties of PLA/PBAT and PLA/PBSA blends and their morphological stability under shear flow”. Journal of Rheology 59, p. 317-333, 2015
Bousmina, M. “Effect of interfacial tension on linear viscoelastic behavior of immiscible polymer blends” Springer-Verlag,1999.